PDA

View Full Version : 1953 Chevrolet Stake Truck - The Jolly Green



Blazerbogger
11-20-2009, 06:14 PM
I'm just about to receive the final parts for this two year old build. The history and significance of the truck is a long story, but in short, it was used on a summer camp for many years that my grandparents ran.


http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246931.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246924.jpg


The truck-circa 1978


http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246823.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246828.jpg

Blazerbogger
11-20-2009, 06:15 PM
Scale version #1 April 2007

http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246856.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246872.jpg


Scale Version #2 May 2007

http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246883.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246875.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246877.jpg


Scale Version #3 December 2008

http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246914.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246921.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22591713/378246905.jpg


I'll get some new pics of the body/chassis and parts tomorrow.


.

jeffro
11-20-2009, 06:45 PM
Something different, I like it. Are you going to use the xc-01 ( I think) independent axles on it. I may be wrong on the model type.

Blazerbogger
11-20-2009, 07:11 PM
It's going to be leaf sprung on both axles (it will have an I-beam front axle and a narrowed TLT in the rear). I have some Tamiya semi truck wheels and tires on the way from eBay.

spencertrax
11-21-2009, 05:03 AM
awesome, I really like it

Blazerbogger
11-21-2009, 07:12 AM
This was also the first lexan body I did bodywork on. I had to remove the bodypost and screw holes.


http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279907.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279912.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279923.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279931.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279946.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279951.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279960.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279964.jpg

Blazerbogger
11-21-2009, 07:12 AM
http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279973.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279976.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279979.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378279903.jpg

Flowmastered87gl
11-21-2009, 05:07 PM
nice simple tranny setup!

No reason to make it overly complex with too many gears :D

Blazerbogger
11-30-2009, 09:22 PM
Well I got my rear wheels and tires today. The seller sent a front suspension assembly from a Tamiya semi instead of the front wheels though. I hope I don't have to send it back because it's so cool! I started work on the drivetrain today. The tranny and rear axle are mounted so far.


http://pic20.picturetrail.com/VOL1425/12596055/22734965/378815538.jpg

http://pic20.picturetrail.com/VOL1425/12596055/22734965/378815546.jpg

Northwest 4x4
11-30-2009, 11:43 PM
nice, like the real deal

Blazerbogger
12-10-2009, 02:08 PM
I got a new transmission in it and got it all running, well, at least it moves. It doesn't run well at all. The driveshaft is having a little trouble staying on, but the worst part is the interference. This thing glitches like there's no tomorrow! I can't pull the trigger for more than two seconds without it stopping.


http://pic100.picturetrail.com/VOL710/12798464/22771163/379366479.jpg

http://pic100.picturetrail.com/VOL710/12798464/22771163/379366475.jpg

http://pic100.picturetrail.com/VOL710/12798464/22771163/379366484.jpg

http://pic100.picturetrail.com/VOL710/12798464/22771163/379366443.jpg

http://pic100.picturetrail.com/VOL710/12798464/22771163/379366452.jpg

brunion
12-10-2009, 03:03 PM
Nice work and cool to see and read some of what inspired it. I'm sure you will get running smooth soon.

OldSchoolRC
12-10-2009, 08:19 PM
wow - very cool! You've captured the beat up look perfectly!