Beadlock wheels

[Jadama]

I have been browsing at RC4wd site, and I can't help but be amazed at those wheels, so I have decided to get a set. Can any of those wheels fit the CR01? Would appreciate some suggestions.

[quick5pnt0]

Technically any of them with 12mm hex drives should fit, but you might want to check with RC4wd just to make sure there aren't any clearance problems.

[Wyoming]

Yeah Q5.0 is totally right, most of RC4wds wheels should fit the CR01, They are very nice wheels and I have a few sets myself , but they are kind of a pain to take on and off since most of them have 6-8 hex screws to remove before you can remove the wheel nut so if you change wheels alot they take forever :D

[CM_113]

createacrawler

the owner Troy is a great guy, and he supports the forums[ not here but other scale sites]

any rim should fit just like the new mod said

[Jadama]

just waiting to fill my pocket, took a lot of toll on building my first rig. planning on getting the 2.2 rockstar (these things are really expensive)

[Jadama]

Finally ordered them, do I have to replace the plastic hex with aluminums?

[Wyoming]

not really, but alloy hexes do look cool and are stronger than plastic and the little axle pins are held in place I like these Tamiya ones on most of my cars and trucks.

http://www.tamiyausa.com/product/item.php?product-id=53569

[Jadama]

i see, thanks, i just got them wheels, man these things are sweet looking:D. the caps makes it so real. Noticed there were no holes on them, the stock wheels have holes, do I need to put some?

[Waterboy]

id get the mid slingers, there a scale masterpeice