Ambulance

[highlift23]

Hey guys were do you get TLT 1 axles I wanted to start gathering parts for my 1941 Dodge ambulance project.

[Arcocustom]

Hey guys were do you get TLT 1 axles I wanted to start gathering parts for my 1941 Dodge ambulance project.

Here's the place.:link:http://www.shop.rpphobby.com/product.sc?categoryId=44&productId=1534

http://www.tamiyacrawlers.com/forum/picture.php?albumid=112&pictureid=776

[Blazerbogger]

If RCP crawlers ever get the TLT axle kits in stock again, they're $80 a pair.

[PsycoJuana]

OH MY GOD I LOVE MASH!!!!!!!!!!!!! THAT would bee such a sweet BUILD!

[highlift23]

Thanks guys good info Im going to get a scx10 then I will probibly start the build.



Does anybody know were to get or a set of leaf springs for them??
thanks

[Wyoming]

A quick note about Axial axles is that they are kind of wide so are not as good for most realistic scale builds as Tlt axles are. I have replaced them twice with TLTs on different builds to get my wheels inside the wheel wells,

Also note Axial axles are not allowed on builds featured on Tamiya crawlers since it is a sight owned by Tamiyausa.

[Arcocustom]

[QUOTEDoes anybody know were to get or a set of leaf springs for them??
thanks[/QUOTE]

Found some on e-bay.:link:http://cgi.ebay.com/NEW-TAMIYA-HIGH-LIFT-FORD-TOYOTA-HILUX-Leaf-Springs-TI6_W0QQitemZ250428673949QQcmdZViewItemQQptZRadio_ Control_Parts_Accessories?hash=item3a4eb64f9d
http://www.tamiyacrawlers.com/forum/picture.php?albumid=112&pictureid=779
Found these at RC4WD.:link:http://www.rc4wdstore.com/2/products_new.php?page=10
http://www.tamiyacrawlers.com/forum/picture.php?albumid=112&pictureid=780
Found these at RPP:link:http://www.shop.rpphobby.com/product.sc?categoryId=53&productId=1423
http://www.tamiyacrawlers.com/forum/picture.php?albumid=112&pictureid=781
Found these at RC4WD also:link:http://www.rc4wdstore.com/2/products_new.php?page=6
http://www.tamiyacrawlers.com/forum/picture.php?albumid=112&pictureid=782

[highlift23]

Thanks just so you know Im not going to use axial axles for the build I just said that Im going to get the scx10 then use TLT 1 axles

[Moondoggie]

Good combo for the chassis and axles! :cool:

[Arcocustom]

Yes, I know. RPP has those axles in-stock and their price cannot be beat. Their shipping is the fastest in the land as well. Those axles come with bushings, so if you want bearings, you'll need to add (20) 5X11 size bearings to your list.
:Tamiya1::mod:

[Northwest 4x4]

now are you going to custom chassis or are you going with something else. And do you plan on making the rear doors open and close. and you have to have the red light as well:cool:

[PsycoJuana]

And the Little mash guys to jump out with a stretcher :)

[highlift23]

Yes I plan on buying a XTrail chassis and run a R2 tranny the rest will be custom. and I plan on making the rear bed so yes the rear doors will open and ther will be a full interior with people

[Moondoggie]

And the Little mash guys to jump out with a stretcher :)

That would be epic! :p

[Wyoming]

Look forward to seeing what you do with this build, the Old Dodge military trucks and Power wagons are my favorite 4x4s of all.