Pro-Line Scaler Shocks

[Arcocustom]

There is a new shock made for crawlers and scalers.

PowerStroke Scaler Shocks (90mm-95mm)

Perfect for your scale build or rock crawler.

http://farm4.static.flickr.com/3533/3777121917_8cc407f6f9_o_d.jpg

http://farm3.static.flickr.com/2651/3777121921_677977820d_o_d.jpg

:link:http://www.prolineracing.com/p-700-powerstroke-scaler-shocks-90mm-95mm.aspx

[TubbyT]

Now, if only payday would come a little sooner.

[backtomyroots]

Anyone have a "hands on report" or build with these ? I'm very curious to see them mounted up on some rides.

[Thorsteenster]

Hopefully I should be mounting my set soon.

[Arcocustom]

Here is some more information.

Those of you that want a lot of features, high performance and still maintains realistic details, the new Proline Power Stroke scaler shocks are perfect for your needs.

The Proline Power Stroke scaler shock bodies are threaded aluminum that offer infinite spring pre-load adjustment. The aluminum shock caps ensure the most reliable shocks without fear of popping a shock cap.

The Proline PowerStroke Scaler Shocks come pre-assembled all you need to do is just add oil! Fits SCX-10 or 1:10 scale build Rock Crawlers.

Power Stroke Scaler Shock Features:

Aluminum body and shock cap
Infinite spring pre-load adjustment
True dual-stage spring rate. (Single stage spring also included)
Beefy 3.5mm shock shafts
Injection molded, super durable spring retainer and shock ends
O-Ring sealed shock cap
Free flow molded pistons
Dual O-ring seats and upper and lower shock shaft guides
95mm maximum shock length achieved with included optional shock ends

http://farm3.static.flickr.com/2536/4094606845_e2598a316a_o_d.jpg


What?s included:

Pre-assembled PowerStroke Performance Scaler Shocks (2)
Single stage spring (2)
+5mm longer shock ends (2)

#6060-01 Proline Powerstroke Scaler Shock Plastic and Rebuild Kit (1 pair)**not included**

[brunion]

Arcocustom, I have been considering some PowerStroke shocks for my current project a CR-01. Your CR-01 Jeep build has my attention, would you have and be willing to share some photos of how you mounted the shocks in place of the stock spring setup?

[Arcocustom]

Arcocustom, I have been considering some PowerStroke shocks for my current project a CR-01. Your CR-01 Jeep build has my attention, would you have and be willing to share some photos of how you mounted the shocks in place of the stock spring setup?

The Pro-Line Scaler Shocks should bolt to existing holes in the chassis and lower 4-link mount on the axle. You will probably need some long 3mm bolts, 3mm washers, and some 3mm cone spacers to mount them properly. The pictures below gave me a good example of how it could be done and the confidence it could be done.


http://farm4.static.flickr.com/3636/3696233054_985d73b08f_o_d.jpg


http://farm3.static.flickr.com/2511/3696233064_2b8b770d5f_o_d.jpg


http://farm3.static.flickr.com/2644/3696233068_3ebeeaba4c_o_d.jpg

[Arcocustom]

Arcocustom Shock Mounts.


http://farm3.static.flickr.com/2638/3735846347_0dd4684afa_b_d.jpg


http://farm3.static.flickr.com/2582/3735846355_500f51092a_b_d.jpg

More info about the coil-over set up on my CR-01 Wrangler.

http://www.tamiyacrawlers.com/forum/showthread.php?t=435&page=4